Jumbo Display Traceable® 5mL Vaccine Thermometer

Product SKU: 17752

  • Oversized 1-1/2″H (38mm) digits can be read from 30 feet! Makes reading and recording data quick, easy and squint-free!
  • Three models available to suit your temperature recording needs: Refrigerator/Freezer Thermometer (#17751), Air Temperature Thermometer (#17750) and 5mL Vaccine Thermometer.
  • Min/max and high/low readings are a significant advantage over “current reading-only” glass thermometers.
  • Triple display simultaneously shows maximum, minimum and current probe temperatures plus room temperature.
  • Alarm feature provides alert when temperature rises above or falls below a set point. Alarm is programmable in 1° increments. Alarm continues to sound for up to 12 hours even if temperature returns to non-alarm range.
  • Uses a solid-state probe, which eliminates mercury contamination in refrigerators. Probe is sealed in a miniature bottle (5mL) filled with nontoxic glycol. Solution is GRAS (generally recognized as safe) by the FDA (Food and Drug Administration). Eliminates concerns about incidental contact with food or drinking water.
  • Vaccine bottle mimics vaccine temperature and fits in vaccine tray.
  • Accurately monitor temperatures with the enclosed “temperature-buffered” sensor. Bottle insulates sensor from rapid temperature changes when refrigerator door is opened.
  • Sensor and 10′ (305cm) cable perform accurately even when both are under water.
  • Reads the surrounding temperature or probe temperature. The range is from -58° to 158°F (-50° to 70°C).
  • Use to monitor liquids, air, gas or semi-solids in water baths, refrigerators, freezers, incubators and tanks.
  • Case is made of high-impact, chemical-resistant ABS plastic.
  • 10′ micro-cable permits refrigerator doors to close on it.
  • Range is -58 to 158°F (-50 to 70°C) with a resolution of 0.1° and accuracy of ±1°C.
  • Thermometer fulfills all CDC requirements.
  • NIST (National Institute of Standards and Technology) calibrated! Serial-numbered Traceable® Certificate is provided to indicate traceability to standards provided by NIST.
  • Includes Traceable® Certificate, flip-open stand for lab bench, slot for wall mounting, and Velcro™ and magnetic strips to attach to any surface.
  • Unit is supplied with one AAA alkaline battery.
  • Dimensions: 3-7/8″W x 4-3/8″H x 7/8″D (98mm x 111mm x 22mm).
  • Recalibration is customer’s responsibility.

How to Order

Accessories

Product Enquiry

If you have any questions or would like to enquire about this product then please complete the form below or call us on 0800 525 076