Categories
Information
Shopping Cart
Featured
Bestsellers
Midsize Temperature and Humidity Data Logger (8340)
 Click to enlarge |
If you have any questions please call |
- Combination of features you've been looking for in a temperature monitoring device!
- Large easy-to-read display, memory card data transfer, and audible alarm that sounds when temperature or humidity is out of a set range make these loggers effective and affordable temperature monitoring tools.
- Use of optional Flash Memory Card and reader allows data to be transferred to your PC without physically removing the logger from its application and interrrupting monitoring. Memory card with card reader are sold separately. Card has the capacity to store information on up to 100 data loggers.
- High/Low alarm sounds when temperatures rise above or fall below set temperature points. Parameters are set using available software. Alarm continues until disarmed by pressing the alarm button.
- Alarms are set in one degree increments.
- Min/Max feature displays minimum and maximum temperatures sensed since the logger was last cleared.
- Allows recording of 32,000 sample points user selectable at various intervals from 1 second up to 24 hours.
- Switchable temperature display in °C and °F.
- Temperature logger features a K-Thermocouple probe to use inside refrigerators, freezers, waterbaths and more to extend the temperature monitoring range capability. Probe is four feet in length.
- Temperature & Humidity Logger Temperature Accuracy: ±0.8°F (±0.5°C)
- Temperature Logger Temperature Accuracy: ±1.8°F (±1°C)
- Temperature and Temperature & Humidity Logger Internal Temperature Range (Thermistor): -4 to +158°F (-20 to +70°C)
- Temperature Logger External Temperature Range (Probe Use): -300 to 500°F (-184 to 260°C)
- Temperature & Humidity Logger Humidity Range: 0 to 95%
- Temperature & Humidity Logger Humidity Accuracy:±2%
- Four"AA" batteries are included with each logger. Loggers retain memory when batteries are removed. Approximate battery life is six months.
- Logger casing is made of ABS plastic.
- A certificate of initial calibration accuracy is included with each logger. For other calibration certificates contact our Resource Department when ordering. Recalibration is the customer's responsibiltiy.
- Two keyhole slots for wall mounting.
- Software and cable set sold separatley (#8342) or with logger starter kits (#8343 or #8344).
- Dimensions: 4"W x 3"H x 1-9/16"D (102mm x 76mm x 40mm)
There are no additional images for this product.